Admixture +
Water Proofing +
Other +


REAL SET 231, a water-reducing, set retarding admixture for improving concrete that complies with ASTM C494 Type B and Type D, B5 5075 and AS 1478 specifications.

General Descriptions The dispersion effects of REAL SET 231 improve the workability of the concrete mix thus resulting in significant water reduction. This produces concrete which is cohesive and enhanced properties of compressive and flexural strength.

Pumped concrete
Readymixed concrete
Precast and pre-stressed concrete
Mass concrete placement in single pour
Concrete where extended setting characteristics are required
Increased workability
Better finishes for flatwork and cast surface
Greater pumpability
Reduced segregation
Increased compressive and flexural strength
Reduced permeability
Economical to use
Improved slump retention
Properties REAL SET 231 is formulated from a selected highly purified lignosulphonate and it does not contain calcium chloride
Recommended Dosage REAL SET 231 is recommended at a dosage rate 450ml +- 50ml per 100kg cement for most concrete mixes containing average concrete ingredients. The dosage rate can be modified to fit variations in cement, aggregate or job conditions or where special performance characteristics are required. It is recommends that special mix designs with dosage rates outside recommended rate, be developed in consultation with our representative to achieve specified requirements.
Effect of
An overdose of double the recommended rate of REAL SET 231 will result in significant retardation. When overdosing occurs, it is important to maintain adequate curing so that the ultimate strength of the concrete will not be adversely affected but will increase
Packaging REAL SET 231 is supplied in bulk by metered tanker or sealed 205 litre drums
Dispensing REAL POINT SDN BHD will supply and install a complete line of electrically-operated automatic dispensing equipment. Our technical department can assist with recommendations on suitable dispensing equipment and installation to meet unique job site and conditions.