Admixture +
Water Proofing +
Other +


REAL FLOW 600, a high-range water-reducing admixture that meets or exceed the requirements of ASTM C494 Type A and Type F, AS 1478 and BS 5075 specifications.

General Description REAL FLOW 600 is a non-retarding, high range water reducing admixture for concrete. It contains modified naphthalene sulphonate polymers. It may be added to the concrete at the job site or at the ready-mix concrete plant for maximum ease of use. No chlorides are used in its formulation; consequently, it is recommended for pre-stressed concrete. It is also compatible with air-entraining agents, waterproofing agents and many other admixtures. However, each material should be added to the concrete separately. REAL FLOW 600 can produce highly fluid, self-levelling concrete requiring little compaction during placing. With a high-water reduction capability, REAL FLOW 600 reduces permeability and accelerates early strength gain.

Pumped concrete
Slender structures
Precast and pre-stressed concrete
Structures with congested reinforcements
Early removal of formwork for faster turnover
Advantages /
Increases workability and cohesion, aids pumping by reducing line friction
Reduces water requirement thereby reduces porosity and permeability
Reduces segregation and gives improved surface finish
Substantial cement savings are possible without strength or workability loss
When used as a superplasticizer, little or no compaction needed
High slump, flowable concrete
High performance concrete
Low water/cement ratio concrete
Recommended Dosage The optimum dosage should be determined by site trails with the particular raw materials. As a guide, the dosage rate is normally in the range of: -
flowing concrete - 0.6 litres to 1.4 litres per 100kg of coment
high strength concrete - 1.4 litres to 2.0 litres per 100kg of cement
Effects Of
An overdose of double the recommended rate of REAL FLOW 600 will result in significant retardation. When overdosing occurs, it is important to maintain adequate curing so that the ultimate strength of the concrete will not be adversely affected but will increase ultimately.
Packaging REAL FLOW 600 is supplied in bulk by tanker and sealed 205 litres drum.
Storage / Shelf Life REAL FLOW 600 can be stored for 6 months in tank and 1 year in tightly sealed original drum.
Dispensing REAL POINT SDN BHD will supply and install a complete line of electrically-operated automatic dispensing equipment. Our technical department can assist with recommendations on suitable dispensing equipment and installation to meet a unique job site conditions.
Health and
Safety Precaution
Inhalation In case of discomfort, move to a ventilated area.
Skin contact Flush skin thoroughly with water.
Eye contact Flush eyes with water and carefully rinse under eyelids. If irritation persists, consult a physician.
Ingestion Immediately rinse mouth with water. Do not induce vomiting. If conditions worsen, consult a physician immediately.
Download PDF Here