Admixture +
Water Proofing +
Other +


REAL FLOW 610, a high-range water-reducing and strength-accelerating admixture for concrete that complies with ASTM C494 Type A and Type F, AS 1478 and BS 5075 specifications.

The dispersing and fluidifying properties of REAL FLOW 610 inhibits the natural agglomeration of cement particles in water to a degree of repellency not achievable by conventional admixtures. The improved dispersion of cement particles increases cohesion, both in the flowing and plastic consistency. This increase in cohesion minimizes segregation and bleeding in high quality concrete with exceptional high early and ultimate strength.

REAL FLOW 610 is formulated from a blend of modified sulphonated naphthalene that gives a substantially longer working life than melamine-based superplasticizer and it does not contain calcium chloride.

Pumped concrete
Slender structures
Precast and pre-stressed concrete
Structures with congested reinforcements
Early removal of formwork for faster turnover
Advantages /
High workability without segregation
Improves cohesion and reduces bleeding
Minimal compaction
Improves pumpability
Increases compressive and flexural strength at one day
Reduces permeability
Normal set without retardation
Recommended Dosage REAL FLOW 610 is recommended at a typical dosage rate of 500ml - 1,400ml per 100kg cement for most concrete mixes containing average concrete ingredients. The dosage rate can be modified to fit variations in cement, aggregate or job conditions or where special performance characteristics are required.

REAL POINT SDN BHD recommends that special mix designs with dosage rates outside recommended rate, be developed in consultation with our representative to achieve specified requirements.

At the recommended dosage rate of REAL FLOW 610 does not affect the setting time of the concrete but at a higher dosage, slight retardation may occur.
Effects Of
An overdose of double the recommended rate of REAL FLOW 610 will result in significant retardation. When overdosing occurs, it is important to maintain adequate curing so that the ultimate strength of the concrete will not be adversely affected but will increase ultimately.
Packaging REAL FLOW 610 is supplied in bulk by tanker and sealed 205 litres drum.
Storage / Shelf Life REAL FLOW 610 can be stored for 6 months in tank and 1 year in tightly sealed original drum.
Dispensing REAL POINT SDN BHD will supply and install a complete line of electrically-operated automatic dispensing equipment. Our technical department can assist with recommendations on suitable dispensing equipment and installation to meet a unique job site and conditions.
Health and
Safety Precaution
Inhalation In case of discomfort, move to a ventilated area.
Skin contact Flush skin thoroughly with water.
Eye contact Flush eyes with water and carefully rinse under eyelids. If irritation persists, consult a physician.
Ingestion Immediately rinse mouth with water. Do not induce vomiting. If conditions worsen, consult a physician immediately.
Download PDF Here