Admixture +
Water Proofing +
Other +


REAL FLOW 656, a high-range water-reducing and set-retarding admixture for concrete that complies with ASTM C494 Type B, D and Type G and BS 5075 specifications.

General Description The dispersing and fluidifying properties of REAL FLOW 656 inhibits the natural agglomeration of cement particles in water to a degree of repellency not achievableby conventional admixtures. The improved dispersion of cement particles increases cohesion, both in the flowing and plastic consistency. This increase in cohesion minimizes segregation and bleeding in high quality concrete

Pumped concrete
Slender structures
Hot weather concreting
Mass concrete placement in single pour
Structures with congested reinforcements
Advantages /
High workability without segregation
Improves cohesion and reduces bleeding
Minimal compaction
Pumped concrete over a long distance
Reduced permeability
Excellent slump retention
Long distance transport
Properties REAL FLOW 656 is formulated from a blend of modified sulphonated napthalene that provides excellent slump retention at the rheoplastic stage against conventional superplasticizer, REAL FLOW 656 does not contain calcium chloride
Recommended Dosage Real FLOW 656 is recommended at a dosage rate of 700ml to 1000 ml per 100kg cement for most concrete mixes containing average concrete ingredients.

The dosage rate can be modified to fit variations in cement, aggregate or job conditions or where special performance characteristics are required. It is recommended that special mix designs dosage rate outside recommended rate be developed in consultation with our representatives to achieve specific requirements.
Effect Of
An overdose of the recommended rate of REAL FLOW 656 will result in significant retardation. When overdosing occurs, it is important to maintain adequate curing so that the ultimate strength of the concrete will not be adversely affected by will increase
Packaging REAL FLOW 656 is supplied in by bulk metered tanker or sealed 205 litre drum
Dispensing REAL POINT SDN BHD will supply and install a complete line of electrically-operated automatic dispensing equipment. Our technical department can assist with recommendations on suitable dispensing equipment and installation to meet unique job site and conditions.
Download PDF Here