Admixture +
Water Proofing +
Other +

REAL POWER FLOW 630

REAL POWER FLOW 630, a high-range water-reducing and strength-accelerating admixture for concrete that complies with ASTM C494 Type A and Type F, AS 1478 and BS 5075 specifications.

General
Description
REAL POWER FLOW 630 is a new generation high-range water-reducing admixture for concrete. Due to the excellent high flowing and water reduction ratio, it will extend the slump retention and also provides high strength and high durable concrete to comply with modern construction engineering request. With a high-water reduction capability, REAL POWER FLOW 630 reduces permeability and accelerates early strength gain.

REAL POWER FLOW 630 is formulated from polycarboxylate acid that gives a substantially longer working life than melamine-based and sulphonated naphthalene superplasticizer. REAL POWER FLOW 630 does not contain calcium chloride.
Recommended
For
Mass concrete
Pumped concrete
Slender structures
Ready mixed concrete
Self-compacting concrete
Concreting in hot climates
Precast and pre-stressed concrete
Structures with congested reinforcements
Early removal of formwork for faster turnover
Advantages /
Benefits

High workability without segregation
Improves cohesion and reduces bleeding
Improved pumpability
Reduced permeability, high durability concrete
Normal set without retardation
Improved slump retention
Reduce building noise
High early and ultimate strengths
Less vibration required
Excellent workability due to lower slump loss than the current high-range water reducers
Various product applications from ordinary to high-strength concrete due to its' high-water reducing rate and excellent strength
Recommended Dosage REAL POWER FLOW 630 is recommended at a typical rate of 500ml - 1,500 ml per 100kg of cement. The dosage rate can be modified to fit variations in cement, aggregate or job conditions or where special performance characteristics are required.

REAL POINT SDN BHD recommends that special mix designs with dosage rates outside recommended rate or with cement reductions be developed in consultation with our representative to achieve specified requirements.

At the recommended dosage rate of REAL POWER FLOW 630, it does not affect the setting time of the concrete but at a higher dosage slight retardation and higher air content may occur.
Effects Of Overdosing An overdose of double the recommended rate of REAL POWER FLOW 630 will result in significant retardation. When overdosing occurs, it is important to maintain adequate curing so that the ultimate strength of the concrete will not be adversely affected but will increase ultimately.
Packaging REAL POWER FLOW 630 is supplied in bulk by tanker or sealed 205 litres drum.
Storage /
Shelf Life
REAL POWER FLOW 630 can be stored for 6 months in tank and 1 year in tightly sealed original drum.
Dispensing REAL POINT SDN BHD will supply and install a complete line of electrically-operated automatic dispensing equipment. Our technical department can assist with recommendations on suitable dispensing equipment and installation to meet a unique job site conditions.
Healthy and
Safety Precaution
Inhalation In case of discomfort, move to a ventilated area.
Skin contact Flush skin thoroughly with water.
Eye contact Flush eyes with water and carefully rinse under eyelids. If irritation persists, consult a physician.
Ingestion Immediately rinse mouth with water. Do not induce vomiting. If conditions worsen, consult a physician immediately.
Download PDF Here