Admixture +
Water Proofing +
Other +

REAL EASE 800

REAL EASE 800, an effective chemical release agent for all types of concrete formworks.

General Description The reduction of alkalis in water of the concrete with the applied release agent on the form will create a thin film which prevent any bond developing between the concrete and formwork thus enabling the formwork to be shipped easily
Recommended
For
REAL EASE 800 is suitable for all type of formwork and other areas where concrete buildup or rusting is underdesired
Advantages /
Benefits

Facilities easy removal of formwork
Prevent rusting of metal form
Ensuring longer life span of timber form
No stain or discoloration to concrete surface
Will not effect the bonding of tiles, render or paint to be applied later
Reduces the incidence of air pockets and tendency for surface spalling at corners
Method Of Use Clean all surface prior to application of REAL EASE 800. Apply thinly and evenly using spray, mop or rollers brush to get better efficiency

Prevent excessive buildup or puddles as it may cause retardation of concrete on the areas

Should spillage occur on the reinforcement, the contaminated area is to be removed by using a cloth/rag dampened with turpentine or coat it with cement slurry to react wit hthe release agent and this slurry should be brush off prior to concrete pouring
Coverage Non-Absorbent forms approximately 20m² per litre

Prous or Rough-Sawn timber approximately 8m² per litre

Smooth plywood or dense-grained timber approximately 12m² per litre
Packaging REAL EASE 800 is supplied in bulk by metered tanker or sealed 205 litre drum
Healthy and
Safety Precaution
Avoid inhalation of vapours and ensure adequate ventilation. Suitable gloves and face protection should be wear, if it comes into contact with eyes, wash immediately with plenty of water and seek medical treatment (do not induce vomiting). Accidental skin contact occur should be remove immediately with soap and water (do not use solvent).
Download PDF Here