Admixture +
Water Proofing +
Other +

REAL POWER FLOW 2000

REAL POWER FLOW 2000, a high-range water reducing and strength-accelerating admixture for concrete that complies with ASTM C494 Type A and Type F, BS 5075 and UNI No. 8145 specifications

General Description REAL POWER FLOW 2000 is a new generation high range water reducing admixture for concrete. Due to the excellently high flowing and water reduction ratio, it will extend the slump retention and also provides high strength and high durable concrete to comply with modern construction engineering request.
Recommended For
Self-compacting concrete
Structures with congested reinforcements
Slender structures
Precast and pre-stressed concrete
Early removal of formwork for faster turnover
Pumped concrete
Advantages / Benefits
High workability without segregation
Improves cohesion and reduces bleeding
Improved pumpability
Reduced permeability, high durability concrete
Normal set without retardation
Improved slump retention
Reduce building noise
High early and ultimate strengths
Less vibration required
Excellent workability due to lower slump loss than the current high range water reducers
Various product applications from ordinary to high strength concrete due to it high water reducing rate and excellent strength
Properties REAL POWER FLOW 2000 is formulated from Polycarboxylate acid that given a substantially longer working life than melamine-based and sulphonated naphthalene superplasticizer
REAL POWER FLOW 633 does not contain calcium chloride
Recommended Dosage REAL POWER FLOW 2000 is recommended at a dosage rate of 700 ml to 1500 ml per 100kg cement. The dosage rate can be modified to fit variations in cement, aggregate or job conditions or where special performance characteristics are required. It is recommended that special mix designs dosage rate outside recommended rate be developed in consultation with our representatives to achieve specific requirements.

At the recommended dosage rate of REAL POWER FLOW 2000 does not affect the setting time of the concrete but at a higher dosage slight retardation and higher air content may occur
Storage / Shelf Life REAL POWER FLOW 2000 can be stored for 6 months if stored at temperatures above 5°C to 40°C in tightly sealed original drums
Packaging REAL POWER FLOW 2000 is supplied in bulk by metered tanker or sealed 205 litre drum
Health and Safety
Precaution
Inhalation : In case of discomfort, move to a ventilated area
Skin contact : Flush skin thoroughly with water
Eye contact : Flush eyes with water and carefully rinse under eyelids. If irration persists, consult a physician
Ingest : If victimis conscious, induce vomitting.
Drink plenty of water
Compatibility Do not use other superplasticizer or water reducing agent in the mix with REAL POWER FLOW 2000. It is compatible with selected Real Point's water reducing agent and superplasticizer
Dispensing REAL POINT SDN BHD will supply and install a complete line of electrically operated automatic dispensing equipment. Our technical department can assist with recommendations on suitable dispensing equipment and installation to meet unique job site conditions
Download PDF Here