Admixture +
Water Proofing +
Other +


REAL SET 231D, a water-reducing, set-retarding admixture for improving concrete that complies with ASTM C494 Type A, Type B and Type D, AS 1478 and BS 5075 specifications.

General Description The dispersion effect of REAL SET 231D improves the workability of the concrete mix thus resulting in significant water reduction. This produces concrete which is cohesive and enhanced hardened concrete properties of compressive and flexural strength.

REAL SET 231D is formulated from a selected highly purified lignosulphonate and it does not contain calcium chloride.

Slip forming
Pumped concrete
Ready mixed concrete
Precast and pre-stressed concrete
Mass concrete placement in single pour
Concrete where extended setting characteristics are required
Increases workability
Better finishes for flatwork and cast surface
Greater pumpability
Reduces segregation and permeability
Increases compressive and flexural strength
Improves slump retention
Economical to use
Recommended Dosage REAL SET 231D is recommended at a typical dosage rate 400ml - 800ml per 100kg of cement for most concrete mixes containing average concrete ingredients. The dosage rate can be modified to fit variations in cement, aggregate or job conditions or where special performance characteristics are required.

REAL POINT SDN BHD recommends that special mix designs with dosage rates outside recommended rate, be developed in consultation with our representative to achieve specified requirements.
Effects of
An overdose of double the recommended rate of REAL SET 231D will result in significant retardation. When overdosing occurs, it is important to maintain adequate curing so that the ultimate strength of the concrete will not be adversely affected but will increase ultimately.
Packaging REAL SET 231D is supplied in bulk by tanker and sealed 205 litres drum.
Storage / Shelf Life REAL SET 231D can be stored for 6 months in tank and 1 year in tightly sealed original drum.
Dispensing REAL POINT SDN BHD will supply and install a complete line of electrically-operated automatic dispensing equipment. Our technical department can assist with recommendations on suitable dispensing equipment and installation to meet a unique job site conditions.
Health and
Safety Precaution
Inhalation In case of discomfort, move to a ventilated area.
Skin contact Flush skin thoroughly with water.
Eye contact Flush eyes with water and carefully rinse under eyelids. If irritation persists, consult a physician.
Ingestion Immediately rinse mouth with water. Do not induce vomiting. If condition worsen, consult a physician immediately.
Download PDF Here