|
General
Description |
REAL POWER FLOW 633 is a new generation high-range water-reducing admixture for concrete. Due to the excellent high flowing and water reduction ratio, it will extend the slump retention and also provides high strength and high durable concrete to comply with modern construction engineering request. With a high-water reduction capability, REAL POWER FLOW 633 reduces permeability and accelerates early strength gain.
REAL POWER FLOW 633 is formulated from polycarboxylate acid that gives a substantially longer working life than melamine-based and sulphonated naphthalene superplasticizer. REAL POWER FLOW 633 does not contain calcium chloride.
|
|
Recommended
For |
• |
Pumped concrete |
• |
Slender structures |
• |
Ready mixed concrete |
• |
Self-compacting concrete |
• |
Precast and pre-stressed concrete |
• |
Structures with congested reinforcements |
• |
Early removal of formwork for faster turnover |
|
|
Advantages /
Benefits
|
• |
High workability without segregation |
• |
Improves cohesion and reduces bleeding |
• |
Improves pumpability |
• |
Reduces permeability, high durability concrete |
• |
Normal set without retardation |
• |
Reduces building noise |
• |
High early and ultimate strengths |
• |
Less vibration required |
• |
Various product applications from ordinary to high-strength concrete due to its' high-water reducing rate and excellent strength |
|
|
Recommended Dosage |
REAL POWER FLOW 633 is recommended at a typical dosage rate of 500ml - 1,500ml per 100kg of cement. The dosage rate can be modified to fit variations in cement, aggregate or job conditions or where special performance characteristics are required.
REAL POINT SDN BHD recommends that special mix designs with dosage rates outside recommended rate or with cement reductions be developed in consultation with our representative to achieve specified requirements.
At the recommended dosage rate of REAL POWER FLOW 633, it does not affect the setting time of the concrete but at a higher dosage slight retardation and higher air content may occur. |
|
Effects Of Overdosing |
An overdose of double the recommended rate of REAL POWER FLOW 633 will result in significant retardation. When overdosing occurs, it is important to maintain adequate curing so that the ultimate strength of the concrete will not be adversely affected but will increase ultimately. |
|
Packaging |
REAL POWER FLOW 633 is supplied in bulk by tanker or sealed 205 litres drum. |
|
Storage /
Shelf Life |
REAL POWER FLOW 633 can be stored for 6 months in tank and 1 year in tightly sealed original drum. |
|
Dispensing |
REAL POINT SDN BHD will supply and install a complete line of electrically-operated automatic dispensing equipment. Our technical department can assist with recommendations on suitable dispensing equipment and installation to meet a unique job site conditions. |
|
Healthy and
Safety Precaution |
Inhalation |
In case of discomfort, move to a ventilated area. |
Skin contact |
Flush skin thoroughly with water. |
Eye contact |
Flush eyes with water and carefully rinse under eyelids. If irritation persists, consult a physician. |
Ingestion |
Immediately rinse mouth with water. Do not induce vomiting. If conditions worsen, consult a physician immediately. |
|
Download PDF Here |